Free Republic
Browse · Search
News/Activism
Topics · Post Article

Skip to comments.

The 3D-Printed Urbee 2 Hybrid Car is Light, Strong, and Nearing Production
Inhabitat.com ^ | 03/03/13 | Morgana Matus

Posted on 03/03/2013 6:34:52 PM PST by Kevmo

click here to read article


Navigation: use the links below to view more comments.
first 1-2021-4041-6061-62 next last
See also at http://phys.org/news/2013-02-kor-ecologic-urbee-car-d.html
1 posted on 03/03/2013 6:35:04 PM PST by Kevmo
[ Post Reply | Private Reply | View Replies]

To: AFPhys; AD from SpringBay; ADemocratNoMore; aimhigh; AnalogReigns; archy; ArrogantBustard; ...

3-D Printer ping!


2 posted on 03/03/2013 6:39:09 PM PST by null and void (Gun confiscation enables tyranny. Don't enable tyranny.)
[ Post Reply | Private Reply | To 1 | View Replies]

To: null and void

For the 3D printing ping list


3 posted on 03/03/2013 6:39:21 PM PST by Kevmo ("A person's a person, no matter how small" ~Horton Hears a Who)
[ Post Reply | Private Reply | To 1 | View Replies]

To: AFPhys; AD from SpringBay; ADemocratNoMore; aimhigh; AnalogReigns; archy; ArrogantBustard; ...

3-D Printer ping!


4 posted on 03/03/2013 6:39:58 PM PST by null and void (Gun confiscation enables tyranny. Don't enable tyranny.)
[ Post Reply | Private Reply | To 1 | View Replies]

To: Kevmo

You’re surrounded...


5 posted on 03/03/2013 6:41:30 PM PST by null and void (Gun confiscation enables tyranny. Don't enable tyranny.)
[ Post Reply | Private Reply | To 3 | View Replies]

To: null and void

Here’s the PhysOrg article.

Kor Ecologic Urbee 2 car will move from 3-D printer to road

February 28, 2013 by Nancy Owano Enlarge (Phys.org)

—Let’s put it simply. An engineer named Jim Kor is printing, as in building, a car. The Winnipeg, Manitoba, car visionary is responsible for the Urbee 2, being readied for the road, intended eventually as an about-town car, with three wheels, and built for two passengers. It looks like a big, shiny red bug cruising down the road. Interest grows in its means of production and implications for car manufacturing in the future. google_protectAndRun(”render_ads.js::google_render_ad”, google_handleError, google_render_ad);Ads by GoogleThe Honda Fit EV - 100% Electric. Not a drop of gas. Learn more at the Official Site. - www.Honda.com If printing cars develop, conventional manufacturing plants might operate aside very small “cottage” plants deploying lights-out manufacturing. Kor’s company, Kor Ecologic, is responsible for the Urbee 2, described as strong as steel yet lightweight. (The motto for the company is “Reasonable Design.”) By using 3-D printing, there is a special focus on lightness but strength; he is creating large pieces with varied thicknesses. The Urbee’s car body will be assembled from about 50 separate parts. The team’s practice is to take small part from a big car and make them into single large pieces. The less pieces, the less car weight. The lighter the car, the more miles per gallon. The less spaces between parts and the Urbee becomes the more aerodynamic. The teardrop-shaped car has a curb weight of 1,200 pounds. The bumper, which is made in two pieces, required 300 hours to finish. The entire car takes about 2,500 hours. jwplayer(”VIDpreview10390”).setup({ id: ‘player10390’, skin: “http://cdn.physorg.com/tmpl/v3/mediaplayer/skins/bekle.zip";, image: “”, height: 375, width: 500, ‘logo.file’: “http://cdn.physorg.com/tmpl/v3/mediaplayer/watermark.png";, ‘logo.position’ : “top-left”, plugins: {”gapro-1”: { accountid: “UA-73855-14”, idstring: “VID: 10390” } }, allowscriptaccess: “always”, modes: [ {type: “flash”, src: “http://cdn.physorg.com/tmpl/v3/mediaplayer/player.swf";, config: {file: “http://www.youtube.com/watch/?v=FOh_m9pPvDo";} }, {type: “html5”, config: {file: “”} } ] }); The printing process to make the car is called Fused Deposition Modeling. (FDM), where one lays down thin layers (0.04 mm) of melted plastic filament. The FDM approach enables tight control by the designer, who is able to add thickness and rigidity to special sections. (Kor likes to compare the fender of a future Urbee with a bird bone. As shown in a cross section of a bird bone, he said there is bone only where the bird needs strength, and the FDM process can replicate a bird bone.) Kor has been printing the body pieces at RedEye, a business unit of Stratasys, which uses 3-D printers to produce on-demand parts and prototypes. Kor Ecologic has drawn up specific design ideals that are applied to the Urbee car project..A few of them are highlighted here. “Use the least amount of energy possible for every kilometer traveled. Cause as little pollution as possible during manufacturing, operation and recycling of the car. Use materials available as close as possible to where the car is built. Use materials that can be recycled again and again…. Be simple to understand, build, and repair. Be as safe as possible to drive. Be affordable.” Kor does not have a high-priced toy in mind but rather an economy car. He has received orders for 14 cars. Most of the orders are from those involved in designing the car. Kor is presently planning to make one car and to drive it, when it is ready, with a partner, from San Francisco to New York City. They hope to do it on ten gallons of gas; Kor would prefer to use pure ethanol. They will try to prove without argument that they did the drive with existing traffic. More information: www.stratasys.com/Resources/Case-Studies/Automotive-FDM-Technology-Case-Studies/Urbee.aspx www.urbee.net/home/

Read more at: http://phys.org/news/2013-02-kor-ecologic-urbee-car-d.html#jCp


6 posted on 03/03/2013 6:41:30 PM PST by Kevmo ("A person's a person, no matter how small" ~Horton Hears a Who)
[ Post Reply | Private Reply | To 2 | View Replies]

To: Kevmo

7 posted on 03/03/2013 6:43:58 PM PST by null and void (Gun confiscation enables tyranny. Don't enable tyranny.)
[ Post Reply | Private Reply | To 6 | View Replies]

To: Kevmo
don't think i want to ride 110mph in anything with only three wheels... specially when it's made of plastic!!!
8 posted on 03/03/2013 6:44:56 PM PST by Chode (Stand UP and Be Counted, or line up and be numbered - *DTOM* -ww- NO Pity for the LAZY)
[ Post Reply | Private Reply | To 1 | View Replies]

To: Kevmo

I hope they ran it through spell check before they hit print.

Typos would be costly.


9 posted on 03/03/2013 6:45:16 PM PST by Right Wing Assault (Dick Obama is more inexperienced now than he was before he was elected.)
[ Post Reply | Private Reply | To 1 | View Replies]

To: null and void

Back to bubble cars, eh? Cousin Itt would be proud.


10 posted on 03/03/2013 6:48:38 PM PST by Olog-hai
[ Post Reply | Private Reply | To 7 | View Replies]

To: Kevmo

If the 2500 hour number in the story is not a misprint, that means it takes 104 days nonstop to generate the body?


11 posted on 03/03/2013 6:50:55 PM PST by nascarnation (Baraq's economic policy: trickle up poverty)
[ Post Reply | Private Reply | To 1 | View Replies]

To: Kevmo

FDM and 3D printing in general is a rapid prototyping tool. Anyone who thinks we will see low-cost parts and products make by 3D printing will need to start by printing off a time machine. Sure the process will become faster but as Scotty famously said “ye canna break the lawsa physics!”


12 posted on 03/03/2013 6:51:24 PM PST by bigbob
[ Post Reply | Private Reply | To 1 | View Replies]

To: Kevmo

http://www.youtube.com/watch?v=QQh56geU0X8


13 posted on 03/03/2013 6:53:10 PM PST by Stosh
[ Post Reply | Private Reply | To 1 | View Replies]

To: Chode

If you look at the pic of the internals, it’s got quite a massive tube frame chassis and roll cage which makes the 1200 lb weight seem dubious.

Also 10 hp is pretty weak, even with e-assist for acceleration.


14 posted on 03/03/2013 6:54:05 PM PST by nascarnation (Baraq's economic policy: trickle up poverty)
[ Post Reply | Private Reply | To 8 | View Replies]

To: nascarnation

It’s a start. It is a bit of a disruptive technology, for firearms and soon cars. Eventually with an open-source approach and a cottage industry, cars like this project would overtake the current industry within 15 years.


15 posted on 03/03/2013 6:59:12 PM PST by Kevmo ("A person's a person, no matter how small" ~Horton Hears a Who)
[ Post Reply | Private Reply | To 11 | View Replies]

To: Chode

One cannot choose how one will die, but for me it won’t be in that death trap.


16 posted on 03/03/2013 6:59:45 PM PST by Venturer
[ Post Reply | Private Reply | To 8 | View Replies]

To: Olog-hai

Three wheels are fun. The Morgan 3 wheel from the 1930s was both fun and fast—especially the super sport. I would like to see a return to these small fast fun cars—mileage was great. It used a two cylinder motorcycle engine.


17 posted on 03/03/2013 7:00:02 PM PST by Forward the Light Brigade (Into the Jaws of H*ll)
[ Post Reply | Private Reply | To 10 | View Replies]

To: Kevmo

Three wheels means that it can be licensed as a motorcycle. I would love one.


18 posted on 03/03/2013 7:00:38 PM PST by Blood of Tyrants (There is no requirement to show need in order to exercise your rights.)
[ Post Reply | Private Reply | To 1 | View Replies]

To: Kevmo

"Phony baloney plastic banana good time rock n roll"

19 posted on 03/03/2013 7:01:37 PM PST by smoothsailing
[ Post Reply | Private Reply | To 1 | View Replies]

To: Stosh

Hilarious video. What a piece of junk.


20 posted on 03/03/2013 7:12:46 PM PST by Kevmo ("A person's a person, no matter how small" ~Horton Hears a Who)
[ Post Reply | Private Reply | To 13 | View Replies]


Navigation: use the links below to view more comments.
first 1-2021-4041-6061-62 next last

Disclaimer: Opinions posted on Free Republic are those of the individual posters and do not necessarily represent the opinion of Free Republic or its management. All materials posted herein are protected by copyright law and the exemption for fair use of copyrighted works.

Free Republic
Browse · Search
News/Activism
Topics · Post Article

FreeRepublic, LLC, PO BOX 9771, FRESNO, CA 93794
FreeRepublic.com is powered by software copyright 2000-2008 John Robinson