Free Republic
Browse · Search
News/Activism
Topics · Post Article

To: All

Perhaps the Popular Science writer seen at the ILENRS-12 conference was contributing to the 60 Minutes episode...

Jim Dunn’s Report on LENR conference in Williamsburg

http://pesn.com/2012/07/07/9602127_Jim_Dunns_Report_on_LENR_conference_in_Williamsburg/

Jim provides an excellent overview, not just of the cold fusion players approaching market, but of the process involved in taking an energy technology to market and where the various players fare in that process.

Slide 31 from Jim’s PPT
(Note, this is not intended to be a photo of an actual Boiler, but to demonstrate the potential size difference. This image on the right is a Dragon electric steam boiler by Fulton.)

By Jim Dunn
for Pure Energy Systems News

Gents - I just returned from the Low Energy Nuclear Reaction, LENR, conf. in Williamsburg, VA.

The event and meetings went very well. Lots of excitement and anticipation. Total of 48 attendees, mostly scientists.

Nothing really new or earth-shattering, but Hagelstein, McKubre, Nagel, Bushnell, and many other scientists did a great job.

There were a number of new faces and very good discussions during breaks and social part of conference.

(See my PPT, attached)

Jed Rothwell did a good summary @ http://www.mail-archive.com/vortex- href=”mailto:l@eskimo.com”>l@eskimo.com/msg67105.html

A Popular Science writer was also there, along with Marianne Macy, doing her usual fine reporting and recording of the talks.

The Pop. Sci. reporter is doing a 4000 word feature story, (about 8 pages). He is planning on visiting Rossi, Pianrelli, DGT, and others in Europe, over the next few weeks.

How are you folks doing with tracking all the upcoming events?

Let’s hope Hank gets to actually see a working reactor at Rossi’s and some solid test data. He should ask Rossi to verify that he can produce all the recent claimed results simultaneously, with the same 600C E-Cat system:

This should show 600C delivered thermal output to a load, (not just reactor wall temp measurement) with 10KW of heat being continuously transferred to some active 10KW load (not wall temp), with Input electrical power of less than 1700W, (for COP = 6), with suitable data showing 45 days of continuous 600C output, at 10KW level of excess thermal power, (COP = 6).

Best,
Jim Dunn
Energy Technology Consultants


8 posted on 07/11/2012 10:52:03 PM PDT by Kevmo ( FRINAGOPWIASS: Free Republic Is Not A GOP Website. It's A Socon Site.)
[ Post Reply | Private Reply | To 5 | View Replies ]


To: Kevmo

give it up, the guy that sold the Brooklyn Bridge already gobbled up the available funds from fools!


17 posted on 07/12/2012 12:36:14 AM PDT by dalereed
[ Post Reply | Private Reply | To 8 | View Replies ]

To: Kevmo
Let’s hope Hank gets to actually see a working reactor at Rossi’s and some solid test data. He should ask Rossi to verify that he can produce all the recent claimed results simultaneously, with the same 600C E-Cat system: This should show 600C delivered thermal output to a load, (not just reactor wall temp measurement) with 10KW of heat being continuously transferred to some active 10KW load (not wall temp), with Input electrical power of less than 1700W, (for COP = 6), with suitable data showing 45 days of continuous 600C output, at 10KW level of excess thermal power, (COP = 6).

If Rossi can show that, to an independent, reputable tester, preferably at the tester's lab, then I'll be very interested.

Until then, I'll wait for test results. Whatever happened to the customer that Rossi sold the e-Cat to last year?

25 posted on 07/12/2012 4:48:43 AM PDT by PapaBear3625 (If I can't be persuasive, I at least hope to be fun.)
[ Post Reply | Private Reply | To 8 | View Replies ]

Free Republic
Browse · Search
News/Activism
Topics · Post Article


FreeRepublic, LLC, PO BOX 9771, FRESNO, CA 93794
FreeRepublic.com is powered by software copyright 2000-2008 John Robinson