Armor shell games & body bags

Corruption and /or incompetence in government contracting goes as far back as records are kept and if history tells us anything of these situations, it is that eternal vigilance is simply an integral part of the cost of purchasing goods and services.

The subject is modern armor for our troops – something that has been in short supply for a while now and has become increasingly valuable in tactical, political and financial terms. For decades, there has been an increasing trend in the military to provide protection to people on the pointy end of our spear via body armor and vehicle armor.

With the advent of a guerrilla-style campaign in Iraq and Afghanistan, our military purchasing planners once again have been overcome with an excess of reality as the number of people they envisioned having the tactical need for armor has undergone an exponential upward shift – kind of like today's pressing need for ammunition – as five years ago when today's ammo and armor acquisitions were laid out under Clinton's watch, the possibility of a war was simply not factored in. How silly, they thought – “We” don't “do” wars.

So, today, the movers and shooters in the military have to husband what protective materials they get most carefully and, in fact, they are doing as good a job as could possibly be expected, given what they have work with. However, the unstated cost of this has been the stripping of armor and armor products from the rest of the Army. What this does is place any Army units deployed to a new combat area in the near term to be at risk for significantly higher casualty rates because of the lack of armor.

But this is not true at the industrial, testing and acquisition part of the military logistics chain. A brief examination of what we use in the field, and why, is in order here.

A number of years ago, we adopted an armored version of the HUMVEE, the M-1114 and thought to provide them to units we thought could make good use of them – mostly military police units. But, as happens in war, we found that some gear is far more useful due to the changes in enemy tactics we have adapted to. There is also the fact that the M-1114 is one very expensive item, having had to be redesigned, mechanically upgraded and strengthened almost from the ground up because its armor is so heavy.

Overloading a vehicle causes it to break down much more frequently, as well as diminish its combat usefulness, as less equipment and troops can be carried in each one. In a recent presentation on an internal analysis of vehicle and equipment morbidity in Iraq, the Army cites overall weight and environmental conditions as the significant factors in a widespread failure to maintain our vehicles in operational condition.

Our always-adaptable troops have taken to putting many different types of field-expedient armor on the composite-framed standard HUMVEE, but at a very substantial weight penalty and with variable effectiveness in preventing casualties. The reason they have done this is because the present armor kits (that don't always fit the tactical needs) in the inventory are prohibitively expensive and in very short supply.

These last two items go hand in hand – price and availability. Because of the price, the military simply cannot afford to buy many of these items – this is just the reality of budgets and it affects the industrial base as fewer potential orders means a lack of business investment in output capacity. But this view assumes the technology and its costs are stable – a very major assumption.

Take for instance the very expensive "SAPI" ceramic body-armor inserts that have been in desperately short supply. The Army will be almost up to supplying the needs in combat areas this month (if suppliers meet their deadlines, but none of them are). But as the Army leadership is most carefully prioritizing who gets them, the flipside is that very few of our units not in an active combat area have them and no protective gear will go back with units as they rotate out of theater. So we are still in a shortage situation overall and therefore can expect an increased casualty rate in any combat-exposed units that are deployed to another hot spot.

But why is this? One answer lies within the community that develops the standards for items that the military buys. In the case of body armor, it has been said in industry circles that the size tolerances for the ceramic plates are "tighter" than currently used production technology can routinely meet. From an engineering standpoint, it is projected that this is the result of trying to conserve expensive component materials, but has created vastly increased expenses from size-rejected inserts coming off the production line.

Companies making them must charge for this, resulting in a far higher per accepted-unit cost. In an effort to mitigate this waste, companies have taken to grinding down the edges to meet the tight specifications, but in doing so, this can create micro-cracking of the ceramic material's matrix that could cause it to fail if hit by a bullet along its periphery ... but at least it is now within the contract size specs. Currently, only one company has achieved a production backlog of just 3,000 units, but that is far better than the performance of its peers.

Nonetheless, one of the hurdles that any product sold to the military must pass is performance testing and, for the ballistic armor sold to the Army, that means the testing center in Aberdeen, Md. There are a number of penetration standards existent within the industry, such as from Underwriters Laboratory, the National Institute of Justice, law enforcement and corrections. But while these are good enough for the CIA and the FBI, the Army requires companies to go through Aberdeen's Test Center so that items may be tested under simulated field conditions and so as to prevent any tampering with test results in aid of a fraud against the government.

Funding is always a key issue in discussions of this type and this is no exception within the zero-sum scenario. Even callously withholding the human costs from consideration, casualties still cost a lot of money. If you can reduce the number of casualties, it follows that you can spend that money elsewhere to good effect.

Since Sept. 11, suppliers of military-related products and services have enjoyed resurgence of demand, and established armor suppliers have reaped the financial benefits. Because of the increased level of demand there have been new companies entering the marketplace with innovative products that are more cost effective than those already in the inventory. The situation becomes even more fluid when you consider that the present suppliers do not have the manufacturing capacity to supply all the potential orders even if the improvements in technology and new cost efficiencies were not present.

Given the high level of overall expenditures generated by a war, it would seem that simultaneously being able to economize while significantly improving the overall fighting effectiveness of our forces and reduce casualties (and their attendant high costs) would be win-win-win situation that the Pentagon would embrace, but this is not the case when it comes to armor for the Army.

Here are but two examples of the inexplicable problems concerning armor acquisitions that have surfaced.

Deploying units had contacted U.S. Global Nanospace, based in Nevada, to develop an effective, but lighter weight product than those already approved, but not readily available. A newcomer to military armor contracts, USGN had seemingly passed all of the hurdles posed by the acquisitions system by early December and publicly announced that they had an approved effective, lower-cost /weight armor. But USGN had limited success getting its products through the purchasing hoops and into the supply stream, despite its clear superiority to its armored steel equivalent.

From Jan. 5-10, Aberdeen was slated to conduct additional testing specifically to satisfy the urgent armor requirements, yet the results are being withheld despite repeated inquiries. Aberdeen has met these reasonable requests with silence and has now failed to return any calls made to them. In a normally routine and transparent process, the sudden shut down of all communication and their arbitrary actions are becoming alarming.

In this case, the low-cost USGN HUMVEE applique kits weigh a mere 300 pounds compared to the 2,200-pound steel product presently approved. This significant weight reduction and cost savings would solve a number of important vehicle reliability issues, including those noted above. Why would a product such as this be withheld?

Army units getting ready to deploy to Iraq are in a quandary because even though they have pre-deployment orders, they can't acquire armor kits, such as for the HUMVEE, except through a nearly year-long acquisitions process. Because a year's advance warning is not given to units chosen to deploy, additional body and vehicle armor is therefore not available to it before it deploys.

The acquisition rules presently in place preclude it from using many of the services of the "Rapid Equipping Taskforce" until it is actually deployed in a combat area, so the system essentially has placed a "Catch-22" situation between the unit getting the armor it needs before it starts taking casualties. Nobody in the acquisitions portion of the logistics bureaucracy seems to have questioned the monetary, human and political costs of retaining peacetime rules in a wartime scenario.

While all of this is going on, the Army's 1st Cavalry division has also been preparing to deploy and looked at the high-cost kits long approved by the Army for its standard HUMVEEs before it goes into the combat zone of Iraq. So the 1st Cavalry turned to Global Technologies, a small Texas company – run by a veteran of that unit – to get at least some of its "soft" vehicles hardened with armor, specifying that the armor has to stop a bullet from an AK-47, the ubiquitous small arm of the Middle East, as the basic Army standard for such armor requires.

What happened next in this situation is both a small miracle and a nightmare. The armor product developed by Ballistic Solutions – a subsidiary of this Texas upstart – not only worked in independent UL standard tests, but is 20 percent lighter than the presently approved vendor’s composite offerings. And, it was offered to be sold to the 1st Cavalry – at an acceptable profit – for about 80 percent less money than what the presently approved vendor charged for its products, although without the ballistic glass with fittings that the 1st Cavalry specifically did not want.

Additionally, it is field-repairable, though it is kind of homely-looking when compared to the "pretty" stuff currently approved. Now five times as many of the "soft" HUMVEEs the division has could have been protected, the troops could safely carry more gear and the unit could be more effective – and their leaders also knew this would equal fewer casualties.

At the end of last October, when the division's commander went through the paperwork to actually buy the product, the Army soon said "No," it needed to be tested at Aberdeen first. So Bill Frazier, the company's president, immediately next-day-air freighted the samples to the lab and, being brand new to military contracts, neglected to send the written pro-forma proprietary declaration with the materials since he was verbally assured by Aberdeen that it will be treated as such and the testing will be expedited. After all, his old unit needed this product to protect their young soldiers.

Time passed and eventually the company got a phone call back from a staffer at Aberdeen who said "You didn't fail, but you didn't do as well as some other armor we tested." After that, nobody at Aberdeen would return Global Technologies calls, nor was a written report sent. However, a field-grade military staffer at Aberdeen did exchange a few e-mails with the company, then shortly cut them off by stating "This is a very busy office" and referred them to the Public Affairs Office for further non-specific and /or non-responsive answers.

The materials that Global Technologies and U.S. Global Nanospace submitted to Aberdeen have not been selected for field-testing in Iraq either.

And according to a Dec. 24 piece, "Up in Armor" by Bob Cox in the Fort Worth Star-Telegram, the Pentagon's spokesman, Maj. Gary Tallman said: "... that even if Frazier's armor were to prove adequate, the Army would probably opt to buy a superior, albeit heavier and more expensive, armor. That's just the culture here ...”

As for the troopers of the 1st Cavalry division, they’ll just have to make do with whatever they can get.

But it gets still curiouser: Nobody "inside" the acquisitions system is talking to anybody about this issue. Professionals within the armor business for decades are actually getting the "you-don't-want-to-be-asking-about-this-for-your-own-good" kind of responses from colleagues that Hollywood conspiracy films have long favored. Long-time industry insiders have told me they have never seen this kind of a response to a simple matter of testing materials for suitability.

Even if the technical aspects of the test results were to become classified, as sometimes happens, there is still a written report issued that states the test was performed and whether the material passed or failed, as well as the standard that was used.

In discussions with members of the support and procurement community, it has been alleged that about a decade ago, Aberdeen had been suspected of irregularities in testing procedures and of other malfeasance relating to the early development of the Bradley fighting vehicle. After the post-mortem of the Bradley situation, the Army formed the "Joint Live Fire Office" to address some of the issues that had been raised.

Given the items above, there seem to be a number of likely questions for any external investigation to answer.

In light of the circumstances of the long-approved products becoming unexpectedly non-competitive in the military-armor marketplace due to the financial and performance efficiencies achieved by the two independently produced products – why has Aberdeen refused to issue written reports, reversed its own approvals and inexplicably retained some of the submitted test samples that they now say have not been tested?

Has the Army's acquisitions quality watchdog – Aberdeen – and the Pentagon become directly corrupted by commercial influences? If so, why and to what extent?

Why has the Army declined to protect several times as many troops at the same expenditure levels within the same category of already approved funding?

I would hope that the answers to these questions lay in more benign explanations, but there is one thing the troops and I know for certain: Body bags are not in short supply, even if funding and armor is.

This writer provided the information above – along with corroborating evidence – to Republican Congressman Rob Simmons (2nd District, Conn.) who went public on WTIC’s "Connecticut Today Show" on Monday, Feb. 2, and declared that he was taking the membership of the House Armed Services Committee to Aberdeen next week where they will require the armor to be shot at for testing, so they can witness it.

If the materials pass, they will force the Army to get the armor to the troops. Congressman Simmons went on to say that some 60 companies had been stonewalled by Aberdeen and /or were willing to manufacture armor under license in order to provide our troops with the equipment they need and that the situation of single manufacturer, who can not meet our needs, will be ended.

The S.A.G.™ Turret has been designed as a lightweight shielded turret for the High Mobility Multipurpose Wheeled Vehicle ("HMMWV", commonly pronounced Hum-Vee). US Global is designing similar units for NATO and Coalition Forces vehicles including Land Rover and Unimog vehicles.
The S.A.G.™ Turret weighs less than 200 pounds and offers rapid rotational capability. Traditional armored turrets are far too heavy and impede a gunner's ability to effectively and rapidly rotate the turret during battle situations.
The S.A.G.™ Turret is approximately 4 feet in diameter, is designed to interface precisely with military HMMWV rotating turret rings and can be installed by two people in less than one hour using common hand tools.
The S.A.G.™ Turret, made primarily of USGN's proprietary G-Lam™ nano-fiber material, is designed to be impervious to petroleum distillates and to maintain performance at temperatures in excess of 400 degrees Fahrenheit.
In one test using 7.62 cal ammunition, six successive strikes near the same spot did not penetrate the armor, outperforming ceramic faceplates in conventional composite systems. The S.A.G.™ Turret is available immediately for controlled export to allied countries with U.S. government approval.

The durability, strength and low weight of the S.A.G.™ Turret System comes from US Global Nanospace's G-Lam™ nano-fiber anti-ballistic material. G-Lam™ is created with a patent-pending computer-designed weaving process that results in a crimp-free material with tensile performance far superior to common anti-ballistic composite materials. US Global designs each G-Lam™ nano-scale weave to address specific threat characterizations.

Great quote. But I cannot even begin to tell you how angry that article has made me. Sh**head pencil pushers are going to get troops killed.

There is absolutely excuse for this. I am ready to accept her being hurt in the course of normal combat ops. But in this case, the unit had the opportunity to buy armor for it's vehicles with approved funds, and were denied for NO GOOD REASON!

If something happens to her that could have been prevented by this armor, I won't rest until I have someone's head on a spike. This is no idle bluster or threat. In fact, I plan to write a few Congressmen and Senators on this issue.

Verify WND's facts - then trust.

According to the head of 3rd Corps, all troops in Iraq now have SAPI. The supply convoy drivers travel from Kuwait to the Baghdad 15 hours a day on Iraqi Hwys to bring supplies to the troops. Over 180 have received purple hearts so far.

It is a big, complicated effort involving many.

There are powerful politicians without scruples using this as an election year issue - Senators who do nothing but criticize, hold up necessary funds, undermine the war effort...but CARE about the welfare of our troops.

PsyOp, please tell your daughter thanks for her service from a very grateful civilian.

I'm afraid there is a real issue here and its not a political stunt. FYI on the ceramic body armor, the Pentagon promised congress after hearings were held exposing the problem, that all troops in Iraq would have it by 12/31/04. DoD didn't get in on the issue until Congress put a blow torch to them which to me is amazing as it would only be common sense from my perspective. DoD didn't make that deadline which is probably where the commentator gets a dig in on them in the article. The army also issued a misleading press release a few weeks ago announcing that all troops in country or in route had 'vest'. What it didn't say was that they didn't all have plates. I confirmed this from several first hand sources. What is happening is that the plates are behind schedule and being shipped directly to Iraq where they hopefully will join troops inbound and those outbound will hotswap their ceramic plates with their replacements. Hopefully we are close (weeks to months) to having the body armor issue resolved. The vehicular armor is a more severe problem and is not nearly resolved. Pure incompetence within the Army is the root cause of it. Marines are more together in addressing the issue. It is namely sole sourced by the army. If you need details I can supply them. I would recommend being pro-active on this issue because otherwise supply vehicles and humvees will get their budget swiped by more glamorous projects and we'll face another year of 500 or so KIAs.

Disclaimer: Opinions posted on Free Republic are those of the individual posters and do not necessarily represent the opinion of Free Republic or its management. All materials posted herein are protected by copyright law and the exemption for fair use of copyrighted works.