Free Republic
Browse · Search
Bloggers & Personal
Topics · Post Article


1 posted on 03/12/2013 8:22:38 AM PDT by tayper
[ Post Reply | Private Reply | View Replies ]


To: tayper

I found that Linksys EA3500 works well for me. Good luck


2 posted on 03/12/2013 8:24:38 AM PDT by US_MilitaryRules (Unnngh! To many PDS people!)
[ Post Reply | Private Reply | To 1 | View Replies ]

To: tayper

There are as many opinions about routers as there are routers.

For home use, figure on one about $90 to be decent. I have found Linksys to be pretty good as well.

There 3 “bands” that really represent speed (they all use a standard called 802.11). Older wireless receivers use what is called 802.11 “G” — really older ones use “B.” Newer ones use “N” When you see G/N or B/G/N that means it can handled older and newer wireless receivers.

If your desktop doesn’t already have a wireless receiver, get one that matches the manufacturer of your new wireless router. They are around $30.

If your router is also acting as the link to your Internet provider you may have to plug the new one into it. No problem, just plug it into any available port except the one that goes to the wall.

I hope this takes a little fear out. Wireless routers have gotten so commonplace that you really can’t go wrong — but there is no reason to pay more than you need.


3 posted on 03/12/2013 8:31:46 AM PDT by freedumb2003 (I learned everything I needed to know about racism from Colin Powell)
[ Post Reply | Private Reply | To 1 | View Replies ]

To: tayper
Parts is parts! It really doesn't matter - they all work.

I have an old $15 D-link from ebay. It does "g" speed, and works fine for me.

How old is your notebook? You don't need a fast router if your notebook has a slow wireless NIC.

4 posted on 03/12/2013 8:34:25 AM PDT by Slump Tester (What if I'm pregnant Teddy? Errr-ahh -Calm down Mary Jo, we'll cross that bridge when we come to it)
[ Post Reply | Private Reply | To 1 | View Replies ]

To: tayper

Try the Asus RIT-N66U router. I have had good luck with mine and set up was easy.


5 posted on 03/12/2013 8:34:44 AM PDT by The Great RJ
[ Post Reply | Private Reply | To 1 | View Replies ]

To: tayper

ASUS N66u or AC66u.


6 posted on 03/12/2013 8:34:46 AM PDT by TexasGunLover ("Either you're with us or you're with the terrorists."-- President George W. Bush)
[ Post Reply | Private Reply | To 1 | View Replies ]

To: tayper

Linksys/Cisco routers are pretty easy to set up.

Just follow the instructions that comes with it.

WPA and WPA2 security are supposed to be better then WEP, when you get to that point in the set-up and if it gives you an option. FYI.


8 posted on 03/12/2013 8:35:55 AM PDT by TomGuy
[ Post Reply | Private Reply | To 1 | View Replies ]

To: tayper
If you're a geek, take a look at
10 posted on 03/12/2013 9:08:02 AM PDT by rarestia (It's time to water the Tree of Liberty.)
[ Post Reply | Private Reply | To 1 | View Replies ]

To: tayper
If you're a geek, take a look at DD-WRT for your wireless router. DD-WRT is a firmware that you can load into most older and newer wireless routers to truly unleash your router's potential. I use a Linksys E3000 router with DD-WRT and would NEVER go back to the Linksys default firmware. My router's been up for 681 days on DD-WRT firmware. Solid as a rock!
11 posted on 03/12/2013 9:08:18 AM PDT by rarestia (It's time to water the Tree of Liberty.)
[ Post Reply | Private Reply | To 1 | View Replies ]

To: tayper

used to run a netgear 614 for years, now run a Belden , simple, cheap, good luck on de-cabling, wireless is the way to go..


13 posted on 03/12/2013 9:44:21 AM PDT by NormsRevenge (Semper Fi)
[ Post Reply | Private Reply | To 1 | View Replies ]

To: tayper

I have a Cisco Linksys router. It’s worked well for me. It’s turned our house into an internet cafe.


14 posted on 03/12/2013 9:48:19 AM PDT by Cicero (Marcus Tullius)
[ Post Reply | Private Reply | To 1 | View Replies ]

To: tayper

Belkin. N or newer.
Plug it in and call the 800#.

They will walk you thru.

Piece o’ cake, that way.


15 posted on 03/12/2013 9:51:07 AM PDT by Adder (No, Mr. Franklin, we could NOT keep it.)
[ Post Reply | Private Reply | To 1 | View Replies ]

To: tayper
I got a Linksys e3000 on eBay and loaded DD-WRT on it.

An industrial-strength router for a consumer-grade price.

16 posted on 03/12/2013 11:15:34 AM PDT by E. Pluribus Unum ("Somebody has to be courageous enough to stand up to the bullies." --Dr. Ben Carson)
[ Post Reply | Private Reply | To 1 | View Replies ]

To: tayper

Wireless is not secure. Stay with the wired network. Of course, as soon as you go on the internet then “secure” goes down the tubes but wired is still more secure than wireless.

If you insist upon wireless then make sure that the router has a built-in, hardware firewall.


17 posted on 03/12/2013 1:16:56 PM PDT by spel_grammer_an_punct_polise (Learn three chords and you, too, can be a Rock Star!)
[ Post Reply | Private Reply | To 1 | View Replies ]

To: tayper
Low end Mikrotik Rouberboard. http://www.mikrotik.com/

If you're not doing anything interesting, any of your current routers with built in access point will support wpa2 encryption, and b g or n wireless. Pick one.

19 posted on 03/13/2013 9:41:47 AM PDT by Lee N. Field ("You keep using that verse, but I do not think it means what you think it means." --I. Montoya)
[ Post Reply | Private Reply | To 1 | View Replies ]

Free Republic
Browse · Search
Bloggers & Personal
Topics · Post Article


FreeRepublic, LLC, PO BOX 9771, FRESNO, CA 93794
FreeRepublic.com is powered by software copyright 2000-2008 John Robinson