Posted on 02/09/2017 4:57:59 PM PST by Ouderkirk
THe entrenched democRAT hacks who remain in their jobs at BATF are trying to give the democRAT Party a topic they think has legs. Ghost Guns.
In the video you see the nitwit reporter cringe when the shooter pulls the trigger. What experienced shooter cringes like a little girl when that big nasty black rifle discharges?
Watch the video at 1:22...this reporter it s TOTAL fag.
Notice the Fake News reporter does not assemble the kit himself .... he has an ATF expert assemble it. Also, fake news reporter references “thousands of crimes committed with untraceable weapons” .... really? And just how many are solved with traceable weapons?
A lower can legally be sold in a private sale if it is designated as a rifle, not as a pistol but I don't see Dalaquan, the aspiring rapper going to that much trouble.
He'll just see his Fast & Furious connection.
“Ghost guns” is just another term invented by liberals to scare people into giving up another freedom. The reporter claims to want to prevent criminals from getting “ghost guns” but never mentions that criminals already have guns.
It seems almost unbelievable, but it is possible to be even less manly (Gersh Kuntzman, a journalist who earned his undisputed first place in metrosexual history):
http://www.nydailynews.com/news/crime/firing-ar-15-horrifying-dangerous-loud-article-1.2673201
“I’ve shot pistols before, but never something like an AR-15. Squeeze lightly on the trigger and the resulting explosion of firepower is humbling and deafening (even with ear protection). The recoil bruised my shoulder, which can happen if you don’t know what you’re doing. The brass shell casings disoriented me as they flew past my face. The smell of sulfur and destruction made me sick. The explosions — loud like a bomb — gave me a temporary form of PTSD. For at least an hour after firing the gun just a few times, I was anxious and irritable.”
80% receivers can legally be sold without an FFL. To make it into a functioning receiver, you must do all the work yourself and you can only transfer ownership to one of your heirs upon your death.
Saw that. He is the very definition of a pussy. There are videos of 6 year old girls shooting an AR-15 with no complaints.
Even though it’s PCR-80 it requires a certain skill set, which obviously the nitwit reporter doesn’t possess. As you point out he has to get a retired BATF agent to do it for him.
It’s not rocket science, and machining the fire control cavity isn’t a huge deal but it does require some skills. The key to it is the buffer detent. Drilling that hole properly with basic hand tools is not a simple task. Getting it square to the buffer is not a hole that is included with ANY of those jigs.
“thousands of crimes committed with untraceable weapons”
= = =
What crimes?
Jay walking?
What weapons?
Fingernail files?
Seriously, THOUSANDS of Crimes? Certainly not thousands of murders.
What did “Ghost Busters” use?
.... Ghost Guns ... duh.
Don't see Demetrius or Jose pulling themselves away from the weed and hos to put in the time.
There's also math involved and decimal points.
Mouse gun.
Try an M1 Garand on that sissy.
Give him a Garand and he'll wet his panties.
See post #11. Couldn’t load the video before. Us Freepers have a habit of mouthing off before actually reading the story or watching the video.;-)
As light as the recoil is on an AR-15, I wonder what would happen if somebody handed him an M38 Mosin-Nagant?
There’s also math involved and decimal points.
= = =
Good thing you did not say ‘cursive’!
And? Nothing I said is incorrect. I just neglected to mention that it requires some skill to finish the receiver without ruining it.
Where can I get one and how much do they cost?
Try here:
A full AR-15 Rifle kit is about $650.00 and it includes the cutting tools to machine the lower. Videos are available on YouTube showing how to do it and then how to assemble the rest of the firearm. They make a very nice gun.
There are plenty of places that sell PCR-80’s and the jigs.
None of them come with the buffer detent drilled out, and none of the jigs have that hole laid out for you either. I built a drill contraption that is belt driven in a v-block. I cut the drill down to a size to fit in the buffer tube hole and move the workpiece up with knee type device and dial indicator to tell me how far in I’ve drilled.
You can drill them at an angle from the top, using a small diameter drill to reduce the angle to a minimum, and gradually increase the bit diameter to the correct size. It’s definitely something I’ve had to work at to perfect.
Hell, you can 3-d print them in plastic that will last for a short period of time.
I’ve considered trying to make them from epoxy and vinylester resins too. Sort of like an injection molded version of JB Weld....maybe someday I’ll give that a try.
Disclaimer: Opinions posted on Free Republic are those of the individual posters and do not necessarily represent the opinion of Free Republic or its management. All materials posted herein are protected by copyright law and the exemption for fair use of copyrighted works.